CNC FINGER CHUCKS
FINGER CHUCKS: For faster speeds, closer tolerances and greater flexibility. Standard and specialty chucks are available for all wheel manufacturing needs. These chucks are built to be lightweight for quickness and reduced stress on the machine. All tooling is top-quality for quick change-over. "Floating" jaws assure even clamping and no loss of clamp force. Both 1st and 2nd operation configurations are available. Complete in-house engineering and manufacturing ensures smooth product development and on-time delivery. Replacement parts are well stocked and readily available to prevent excessive down-time.
Manufactured in the USA . 
WMT Chuck for Vertical IMT Lathes
This chuck will operate on 40 to 120 PSI. Standard 3-7 Bars at Clamp Up. Locators have 150 lb force. Gripping force is increased by 30%. This was chuck was made to accommodate 13" to 20" and the .200 diameter change between 16" to 17". With special tooling it will accommodate "1/2" sizes (i.e.: 16.5", 19.5", etc.)
1st Op Chuck for Vertical IMT Lathes
- 2,200 RPM
- Ultra light Increase gripping force
- Centrifugally balanced OD centering locators
- The first ever pneumatic operated finger pull back chuck
- No machine modifications required. (Just set the chuck on your machine, zero your tools and run your same program.)
- OD and ID centering
- One chuck handles 13" to 20" diameter
- Available for 1st and 2nd Operation
- Increase machine capacity by 1" in diameter and 1" in width
- Faster changeover, less tooling to change.
2nd Op Chuck for Vertical IMT Lathes
WMT "In A Box" Pullback Finger Chuck
This is the lowest price ever advertised for a pullback finger wheel chuck, un-tooled.
- SERIES 10 - Capable of turning 12" to 18" wheels. Comes with a standard configuration of A-8 mounting for 14" to 17" wheels. All other tooling is sold separately.
- SERIES M - Capable of turning 15" to 22" wheels, and comes standard with Clamp Arms for 15" to 18" wheels. All other tooling is sold separately.
Wheel Tooling & Chuck Parts
Our prices are consistent and readily available. All parts are manufactured in the USA and fully guaranteed. All components are made with certified materials and are inspected by Magnaflux. They are completely interchangeable with ASI chuck parts. We can supply you with top-quality part rests, locators, tooling plates, jaws and much more. Please contact us for a complete price list of chuck parts.
Repair Service for Ward & ASI Chucks
Have your chucks been inspected in the last twelve months? If not, then they're probably unsafe and inaccurate.
What does chuck repair include?
Time required: Approximately three weeks. Loaner chucks* available with three chucks (or more) scheduled for service.
Limited supply available. We carry a large inventory of new and used ASI, Matsumoto chucks. We have over $1 million worth of Okoma tooling. Call for availability. (562) 602-1207.
