ACT/Coleman brings you Used Machinery from around the United States. Once they come into our warehouse, we service and repair them. Sometime we even have them painted. We strive to find the most accurate information on the machinery that we sell.

If you do not see what you are looking for, do not hesitate to pick up the phone and call email us. Being in the business for more than 45 years, we can offer our assistance in finding your the right machine.

Each of the below machinery has a Quote/Specification document. Simply click on the PDF icon to left of the machine that you may be interested in.


     
AutoStron V-218

AutoStrong Power Chuck, V-218

3-Jaw Wedge Type Non Through-hole Power Chuck
High performance - Similar high performance with N series.

Autostrong PDF
 
 
Clausing Drill Press

Clausing Model Series 16VC-1

Similar to our BS-260M, the BS-260SA semi-automatic bandsaw manages faster turnaround times. We designed this model with foot pedal controls for production runs.

Maximum capacity of 8.93” round at 90°, Dual-angle head cuts at up to 60° right and up to 45° left, making it one of the most versatile mitering band saws on the market.

Clausing Drill Press
 
 
Clausing Engine Lathe

Clausing Engine Lathe, Model 5913, 12" x 36" 52-2000 RPM, 6" 3-Jaw, 8" 4-Jaw, Collet Chuck, Tool Post

Clausing 5900 Series lathes were once popular in professional machine and repair shops, schools, industrial training establishments and today, increasingly, in home workshops of enthusiastic amateurs.

Clausing Engine Lathe
 
 
Femco 1400

Femco Kafco VMC-1400

Built with large internal box ways in all axes. The four “Y” axis ways support the zero overhang saddle to handle heavy table loads. the rugged structural design provides the rigidity for heavy cuts and the precision for tight tolerances and fine finishes. FEMCO gives the perfect balance of power, rigidity, accuracy, and value.

Femco 1400
 
 
Ikeda RM-1300

Ikeda Radial Drilling Machine, Model RM-1300

4' X 13" , Drilling and Tapping, Steel and Cast Iron

Ikeda Drill Machine
 
 
Jones & Lamson Epic-214

Jones & Lamson 14” Optical Comparator, Model Epic-214

The Epic-214 is of the original modular design. It is the most precision versatile and largest capacity of the 14” screen optical for its time.  It offers side screen construction, popular with operators for ease of operation and human comfort.  This machine features:  easy-to-view side screen design, extremely large capacity with twin spindle support for the 9” x12” measuring table.

Jones & Lamson Optical
 
 
LeBlond Geared Head Lathe No. 25

LeBlond Heavy Duty Engine Lathe – (32 Speed), Model 25

Hardened & Ground Steel Bed Ways, Four Directional Power Rapid Traverse. 4-Way Tool Post - Threading Dial


LeBond Engine Lathe
 
 
Mori Seiki LL-7

Mori Seiki LL-7B3500

144” x 148” CNC Flat Bed Lathe w/ Fanuc System 6T Controls, 8 ½” Thru Spindle, Bore, 44” Swing @ Gap, (2) 4-Position Indexable Tool Posts, Tailstock, (2) 28” 4-Jaw Chucks, Chip Conveyor and Coolant.  Steady Rest. Excellent condition

Mori Seiki LL-7B3500
 
 
Quincy QE5

Quincy QE 5 Compressor

CFM at Max. PSI: 17.2, Air Outlet Size (in.): 3/4, Air Tank Size (gal.): 80, Amps: 28, Drain System: Manual, Duty Cycle: 100%, Max. PSI: 175, HP: 5, Motor Phase(s): Single

Quincy QE5
 
 
Takamatsu Top Turn

Takamatsu  Takamaz Top-Turn, CNC Gang Tool Lathe

Swing Over Bed: 11.8”, Max Swing: 6.7” (Top of machine max)
Spindle Motor: 7.5 HP, Tool Post:  4 to 6, Slide Travel: Cross Travel (X) 11.8”, Longitudinal Travel (Z) 11.8”, Control: Fanuc 0T-C

Takamatsu Takamaz
 
 
Takang TNC-05

Takang TNC-05 2-Axis, CNC Gang Tool Lathe

Max. Swing Over Bed: 10.240”, Spindle Speed Range: 40-6000 RPM, Primary Tool Carrier:  Slide, Control: Fanuc O-T, , Phase 3 ,

Takang TNC-05
 
 
Troyke

Troyke Cross Slide Rotary Table, Model DMT-18, Lot 3528-3

Working Surface 15 x 15 in.
Cross-slide Travel 13 x 13 in.
Indexing Accuracy on Rotary Table 30 Seconds
Hardened and ground center

Troyke DMT-18
     

Address
Link to All American Wheel Link to Trim-It Link to E-Stopp Brake Email address